Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Classification of electronic componentsDescription: DC/DC converter, 1 output, 20 W, 3.3 V, 6 A5255 -
![]()
Category: Classification of electronic componentsDescription: DC/DC converter, 1 output, 60 W, 5 V, 12 A9564 -
![]()
Category: Classification of electronic componentsDescription: DC/DC converter, 1 output, 40 W, 3.3 V, 6 A5200 -
![]()
Category: Classification of electronic componentsDescription: DC/DC converter, 1 output, 30 W, 24 V, 1.25 A1869 -
![]()
Category: Classification of electronic componentsDescription: DC/DC converter, 1 output, 60 W, 5 V, 6 A4369 -
![]()
Category: DC/DCconverterDescription: Mean Well 200W Railway certification regulation isolated DC-DC converter - RSD 200 series 200W packaged single output isolated DC-DC converter with a 2:1 wide input range and a 1U low profile of 39mm. The design of these single output isolated DC-DC converters complies with railway certifications (EN50155, IEC60571, IEC61373, EN50121-3-2), making them suitable for vehicles equipped with DC power supply. These railway certified isolated DC-DC converters have high-efficiency circuit designs and are packaged in semiconductors for printed circuit board protection. 2: 1 Wide range input efficiency up to 91% 4000 V DC input/output isolation in accordance with EN50155 (railway certification) natural air convection cooling semiconductor package suitable for printed circuit board protection with built-in constant current limiting circuit using 105 ° C long-life electrolytic capacitors 100% full load aging test LED indicator power on 5G anti vibration ability short circuit, overload, overvoltage and over temperature protection in accordance with EN55022 (CISPR22) Conducted radiation: Class A, radiation: Class B; EN50155 (EN50121-3-2) # # Note that the average time between failures reaches MIL-HDBK-217F standard (25 ° C) and the power begins to decrease when the temperature is above 55 ° C (without substrate). # # The standard is in compliance with IEC60950-1 (LVD) and EN50155/IEC60571, including IEC61373 (impact and vibration), EN50121-3-2 (for EMC) # # Mean Well DC-DC converter # # Mean Well packaged DC-DC converter7929 -
![]()
Category: DC/DCconverterDescription: Mean Well 150W Railway certification regulation isolated DC-DC converter - RSD 150 series 150W packaged single output isolated DC-DC converter with a 2:1 wide input range and a 36mm 1U low profile. The design of these single output isolated DC-DC converters complies with railway certifications (EN50155, IEC60571, IEC61373, EN50121-3-2), making them suitable for vehicles equipped with DC power supply. These railway certified isolated DC-DC converters have high-efficiency circuit designs and are packaged in semiconductors for printed circuit board protection. 2: 1 Wide range input efficiency up to 92% 4000 V DC input/output isolation in accordance with EN50155 (railway certification) natural air convection cooling semiconductor package suitable for printed circuit board protection with built-in constant current limiting circuit using 105 ° C long-life electrolytic capacitors 100% full load aging test 5G anti vibration ability LED indication power on short circuit, overload, overvoltage, overheating and input polarity reverse protection EMC in accordance with EN55022 (CISPR22) Conducted radiation: Class A, radiation: Class B; EN50121-3-2 # # Note: When the average time between failures reaches MIL-HDBK-217F standard (25 ° C) and above 55 ° C, the power begins to decrease (without substrate), and without substrate degradation # # The standard complies with IEC60950-1 (LVD) railway standard: complies with EN50155/IEC60571, including IEC61373 (impact and vibration), EN50121-3-2 (for EMC) # # # Mean Well DC-DC converter # # Mean Well packaged DC-DC converter9995 -
![]()
Category: Classification of electronic componentsDescription: 25W Single Output Swi tching Power Supply7208 -
![]()
Category: power deviceDescription: Isolated DC-DC Converters 40W DC-DC-Converter 2"x1.2" 3kV reg 4:12675 -
![]()
Category: photoelectric sensorDescription: RL28 The series background suppression infrared sensor RL28 infrared photoelectric sensor can detect objects, regardless of their structure, brightness or color, as well as the brightness of the background, making it suitable for many applications. Ultra bright LED display with minimum black/white difference for power on and switching status, switchable through infrared transmission LED light/dark connection for short circuit and polarity reversal protection # # block type9252 -
![]()
Category: Classification of electronic componentsDescription: Sensor, Photoelectric, Diffuse, Back Ground Supression, 5Pin, Range 1.5m6795 -
![]()
Category: photoelectric sensorDescription: Sensor, Photoelectric, Diffuse, Back Ground Supression, 5Pin, Range 1.5m9847 -
![]()
Category: Classification of electronic componentsDescription: V REG LDO 0.1A 2.5V, SOT-23-5, 101; Primary Input Voltage: 3.5V; Output Voltage Fixed: 2.5V; Dropout Voltage Vdo: 60m...5775 -
![]()
Category: Classification of electronic componentsDescription: Module DC-DC 24VIN 2-OUT 5V/-5V 1.5A/-1.5A 15W 5-Pin9267 -
![]()
Category: LEDdriveDescription: Recom 60W Constant current LED power supply, waterproof (IP67) - RACD60 series RACD60 series 60W waterproof constant current LED power supply, with single output, universal AC input, and active power factor correction. This 60W waterproof constant current LED power supply has dual-mode operation: CV mode, where the power supply acts as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, IP67 waterproof enclosure connected via 300mm cable, overload and short circuit protection, EMC compliant with EN55015, EN61347-1, EN61347-2-13, harmonic current compliant with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. Mean time between failures complies with MIL-HDBK-217F standard # # # Recognized cULs # # # Standard UL8750, cUL8750, EN61347 # # # Recom - Constant current LED power supply, IP rating3044 -
![]()
Category: LEDdriveDescription: Recom 60W Constant Current LED Power Supply - RACD60 Series RACD60 Series 60W Open Rack and Constant Current LED Power Supply with Single Output, Universal AC Input, and Active Power Factor Correction. This 60W constant current LED power supply comes with a user adjustable output current limit and dual-mode operation: CV mode, where the power supply serves as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, user adjustable current limiting, overload and short circuit protection through 300mm cable connection, EMC compliance with EN55015, EN61347-1, EN61347-2-13, harmonic current compliance with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. The average time between failures complies with MIL-HDBK-217F standard # # # recognized cULus # # standard UL8750, cUL8750, EN61347 # # # Recom - constant current LED power supply6190 -
![]()
Category: LEDdriveDescription: RECOM POWER RACD150-24 AC/DC LED power supply, active PFC, RACD150 series, 90 V, 305 V, 150 W, 6.3 A, 24 V4055 -
![]()
Category: Classification of electronic componentsDescription: This RAC40-24SB AC to DC power supply from RECOM safely converts alternating currents into direct currents that your electronic devices can make use of. It has a voltage of 24 V and maximum output power of 40 W. This part&s;s single output can handle a current up to 1.667 A. This part has a minimum operating temperature of -40 °C and a maximum of 70 °C.8299 -
![]()
Category: photoelectric sensorDescription: BANNER ENGINEERING R58ECRGB1Q Photoelectric sensor, 10MM, 10-30V7062 -
![]()
Category: photoelectric sensorDescription: R55 Color Mark: Glass Fiber w/ InfraredLED; Range, 646349509 -
![]()
Category: power relayDescription: Electromechanical Relay 2.5KΩ 3A SPDT (( 18.67mm 38.1mm)) Plug-In General Purpose Relay1512 -
![]()
Category: photoelectric sensorDescription: Sensor, Laser, QS30 WORLD-BEAM, Class 2Diffuse, 10-30VDC, 5Pin Euro Style QD9895 -
![]()
Category: photoelectric sensorDescription: WORLD-BEAM QS30 Series Clear Object Sensor; Range:, 101363990 -
![]()
Category: photoelectric sensorDescription: WORLD-BEAM QS30 Series: High-Powered Receiver; Ran, 175289942 -
![]()
Category: photoelectric sensorDescription: WORLD-BEAM QS30 Series: High-Powered Emitter; Rang, 175298575 -
![]()
Category: photoelectric sensorDescription: Sensor, Photoelectric, Receiver, 213m Range, 10-30VDC, 2m, PVC, 717403414
